Tesla lettering for all Tesla models

• Similar to the original lettering
• Gives a sporty look
• Self-adhesive letters
• Includes template for easy installation
• Note: The factory-installed lettering or emblem must be removed! The black lettering cannot be glued over it!

Description

Give your Tesla an individual look with our matte black Tesla lettering for the tailgate, suitable for all Tesla models. The lettering is very similar to the original lettering, but the matte black color gives your Tesla an additional sporty look. The letters are already positioned in a suitable foam template and have an adhesive strip on the back, which makes installation even easier.

For a trouble-free installation, only the old Tesla emblem or the chrome-plated Tesla lettering needs to be removed. Then the new Tesla lettering can be easily applied with the help of the foam template.

Installation Tip: It is recommended to clean the tailgate beforehand. Before removing the old lettering, the exact position should be marked. If there is a Tesla logo on the tailgate, it is advisable to mark the center for the later alignment of the lettering before disassembling the logo. This can be done very easily with some adhesive tape, for example. Then carefully remove the individual letters or the glued-on logo. Dental floss, fishing line or a map can be used as aids. Adhesive residues can be removed with a hairdryer and special adhesive removers by heat. If necessary, polish with a fine polishing agent afterwards. Then peel off the first carrier film from the letters, making sure that the letters remain in the template. Then carefully stick the letters with the template onto the cleaned surface and press firmly. Once the letters adhere, the template can be removed together with the other carrier film.